1995 International Harvester 8200: recalls and complaints
NHTSA lists 2 recall campaigns for the 1995 International Harvester 8200. The newest campaign is 95V144000. NHTSA received the report on 2 Aug 1995. The NHTSA record gives the component Service Brakes, Hydraulic / Foundation Components / Hoses, Lines/Piping, and Fittings. NHTSA has no complaint on file for this model year.
The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.
This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.
Remedy of the newest campaign, 95V144000, in the NHTSA record
Navistar dealers will inspect vehicles and repair by installing brake lines and fittings as required.
Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.
NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .
Since the last update
No tracked figure of this page changed in a data update. What the log tracks
Recall campaigns
2 campaigns, newest first. 6,727 units in total.
95V144000Received . 278 units.
Service Brakes, Hydraulic / Foundation Components / Hoses, Lines/Piping, and Fittings
- Defect, in the NHTSA record
These vehicles were built with an improperly plumbed brake system which affects the braking on the rear axle when running either bobtail or pulling a trailer.
- Consequence, in the NHTSA record
This condition can affect the stopping ability of the vehicle because the front steer axle brakes and trailer's brakes would be doing most of the braking. Increased stopping distances would be required causing accelerated wear on the steer axle and the trailer brakes.
- Remedy, in the NHTSA record
Navistar dealers will inspect vehicles and repair by installing brake lines and fittings as required.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Owner notification date in the NHTSA record: .
94V196000Received . 6,449 units.
Vehicle Speed Control / Accelerator Pedal
- Defect, in the NHTSA record
The base of the electronic accelerator pedal is made of die cast aluminum. The base mounts directly to the cab firewall. The cab firewall is not rigid enough or flat enough at the mounting surface, causing stress on the accelerator base that will cause the mounting pads on the base of the pedal assembly to fail and totally separate from the firewall.
- Consequence, in the NHTSA record
This can cause loss of speed control, driver distraction, and result in an accident.
- Remedy, in the NHTSA record
Dealers will inspect the accelerator pedal assembly and install a plate between the accelerator mounting base and the firewall on those units where the base is not broken and has no visible signs of a crack. If the base is broken or cracked, the accelerator assembly will be replaced with a new redesigned accelerator pedal assembly.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Owner notification date in the NHTSA record: .
The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.
Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.
Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.
Complaints by component
The NHTSA complaint file has no complaint for this model year.
Investigations
The NHTSA investigation file has no investigation that names this model year.
Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.
Other model years
The number under each year is the number of recall campaigns.
- 19941
- 19952
- 19961
- 19972
A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.
Follow by RSS:Vehicle recalls
Official channels
- NHTSA VIN lookupNHTSA shows the unrepaired recalls of one vehicle from its VIN or its license plate.
- NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.
- NHTSA page of the 1995 International Harvester 8200The recalls, the complaints and the investigations that NHTSA shows for this model year.
Cite this page
Recall Register. 1995 International Harvester 8200: recalls and complaints. https://recallregister.com/vehicle/international-harvester/8200/1995/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .
Sources
- Source
- NHTSA Office of Defects Investigation
- Licence
- US government work, public domain
- Recall file through
- 30 Sep 2026
- Complaint file through
- 30 Sep 2026
- First complaint in the file
- 1 Jan 1995
- Manufacturer in the recall file
- INTERNATIONAL TRUCK AND ENGINE
The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.
Questions
- How many units are in the recall campaigns for the 1995 International Harvester 8200?
- 6,727 units in 2 campaigns. A campaign can name other models and model years, and its units include them.
- How many recall campaigns does the International Harvester 8200 have for all model years?
- NHTSA lists 4 recall campaigns for the International Harvester 8200, model years 1994 to 1997. 2 of them name the 1995 model year.
- Is an NHTSA investigation of the 1995 International Harvester 8200 open?
- The NHTSA investigation file has no investigation that names this model year.