Recall Register

1993 BMW 325: recalls and complaints

NHTSA lists 3 recall campaigns for the 1993 BMW 325. The newest campaign is 94V151000. NHTSA received the report on 10 Aug 1994. The NHTSA record gives the component Seat Belts / Front / Anchorage. NHTSA has 8 complaints on file for this model year. 1 NHTSA investigation names this model year.

The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.

This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.

Remedy of the newest campaign, 94V151000, in the NHTSA record

On automatic transmission models only, the dealer will replace the transmission support crossmember with a crossmember used on the manual transmission model. Also, the transmission rear bushing supports will be replaced with bushing having different performance characteristics. The steering column front support bearing at the firewall will be replaced with a modified part using a teflon inner surface and teflon spray will be applied to the column housing in the area of the bearing. A brace will be added between the knee bolster support and the steering column.

Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.

NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .

Since the last update

No tracked figure of this page changed in a data update. What the log tracks

All updates to the register

Recall campaigns

3 campaigns, newest first. 548,300 units in total.

  1. 94V151000Received . 57,000 units.

    Seat Belts / Front / Anchorage

    Defect, in the NHTSA record
    In a FMVSS no. 208 30 miles-per-hour compliance test, an unbelted test driver dummy's chest maximum resultant acceleration was 70.8 g's, which exceeds the maximum allowable value of 60 g's. Also, the unbelted passenger dummy's left femur maximum load was 2361 lbs, which exceeds maximum allowable value of 2250 lbs. The vehicles do not comply with FMVSS no. 208, "occupant crash protection."
    Consequence, in the NHTSA record
    Consequence of non-compliance: in the event of an accident, the occupant will be subjected to an increased risk of injury.
    Remedy, in the NHTSA record
    On automatic transmission models only, the dealer will replace the transmission support crossmember with a crossmember used on the manual transmission model. Also, the transmission rear bushing supports will be replaced with bushing having different performance characteristics. The steering column front support bearing at the firewall will be replaced with a modified part using a teflon inner surface and teflon spray will be applied to the column housing in the area of the bearing. A brace will be added between the knee bolster support and the steering column.

    Report filed by BAYERISCHE MOTOREN WERKE. Owner notification date in the NHTSA record: .

  2. 94V066000Received . 116,300 units.

    Fuel System, Gasoline / Delivery / Hoses, Lines/Piping, and Fittings

    Defect, in the NHTSA record
    Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
    Consequence, in the NHTSA record
    Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
    Remedy, in the NHTSA record
    A redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.

    Report filed by BAYERISCHE MOTOREN WERKE. Owner notification date in the NHTSA record: .

  3. 93V015000Received . 375,000 units.

    Visibility / Defroster/Defogger/HVAC System / Heater Core

    Defect, in the NHTSA record
    The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.
    Consequence, in the NHTSA record
    Vehicles operated under this increased cooling systempressure condition can suffer damage or failure of parts of the cooling systemsuch as (1) leakage from a coolant hose, (2) leakage of the radiator orexpansion tank, (3) disconnection of a hose from a pipe or a fitting, and (4)cracks in the heater core end piece resulting in coolant leakage. In some cases,boiling coolant can contact the lower right leg of the driver resulting inburns. Also, escaping coolant in the passenger compartment can cause vaporfogging of the interior surface of the windows, reducing driver visibility.
    Remedy, in the NHTSA record
    Dealers will install a thermostatic bypass valve in the engine compartment to control coolant temperature in the heater core. Also, a new design radiator cap will be installed, to control pressure and provide greater coolant overflow in the event of overheating.

    Report filed by BAYERISCHE MOTOREN WERKE. Owner notification date in the NHTSA record: .

The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

Complaints by component

8 complaints, 13 component mentions.

A complaint can name more than one component. Each component that a complaint names is one component mention. This model year has fewer than 50 component mentions, so the table shows the number of mentions only.

1993 BMW 325: component mentions in complaints
ComponentMentions
Fuel System, Gasoline3
Air Bags3
Visibility2
Structure2
Electrical System1
Service Brakes, Hydraulic1
Engine and Engine Cooling1
Complaints that report a crash
2
Complaints that report a fire
1
Injuries in the complaints
3
Deaths in the complaints
0
Date of the newest complaint
18 Nov 1998

These figures are the entries of the persons who sent the complaints.

Complaint: A report about a possible safety problem that a person sends to NHTSA. This site shows the number of complaints and not their text.

Complaints about the 1993 BMW 325, by the year NHTSA received them. The largest year is 1996, with 3 complaints.

Investigations

NHTSA investigations that name the 1993 BMW 325
NumberTypeSubjectComponentOpenedClosedCampaign
EA95013Engineering analysisAIR BAG WIRING FAILUREAir Bags31 Mar 199515 Jul 199696V110000

Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.

Other model years

The number under each year is the number of recall campaigns.

  1. 19841
  2. 19852
  3. 19863
  4. 19872
  5. 19882
  6. 19892
  7. 19902
  8. 19913
  9. 19923
  10. 19933
  11. 19941
  12. 19950
  13. 19960
  14. 19970
  15. 19980
  16. 19990
  17. 20002
  18. 20012
  19. 20022
  20. 20061
  21. 20071
  22. 20081
  23. 20091
  24. 20101
  25. 20111
  26. 20121

A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.

Official channels

Cite this page

Recall Register. 1993 BMW 325: recalls and complaints. https://recallregister.com/vehicle/bmw/325/1993/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .

Sources

Source
NHTSA Office of Defects Investigation
Licence
US government work, public domain
Recall file through
29 Sep 2026
Complaint file through
29 Mar 2018
First complaint in the file
1 Jan 1995
Manufacturer in the recall file
BAYERISCHE MOTOREN WERKE

The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.

Questions

How many units are in the recall campaigns for the 1993 BMW 325?
548,300 units in 3 campaigns. A campaign can name other models and model years, and its units include them.
How many recall campaigns does the BMW 325 have for all model years?
NHTSA lists 11 recall campaigns for the BMW 325, model years 1984 to 2012. 3 of them name the 1993 model year.
Which component do the complaints about the 1993 BMW 325 name most often?
Fuel System, Gasoline: 3 of 13 component mentions.
Is an NHTSA investigation of the 1993 BMW 325 open?
No. The 1 investigation that names this model year has a closing date in the NHTSA file.