2000 International Harvester 8000: recalls and complaints

NHTSA lists 8 recall campaigns for the 2000 International Harvester 8000. The newest campaign is 03V193000. NHTSA received the report on 21 May 2003. The NHTSA record gives the component Suspension / Front / Hub. NHTSA has no complaint on file for this model year.

The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.

This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.

Remedy of the newest campaign, 03V193000, in the NHTSA record

Dealers will replace all front axle hubs. Owner notification began on november 12, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.

NHTSA VIN lookup

Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.
NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on 1 Oct 2026. Complaint file through 30 Sep 2026. Recall file through 30 Sep 2026.

Since the last update

No tracked figure of this page changed in a data update. What the log tracks

All updates to the register

Recall campaigns

8 campaigns, newest first. 393,393 units in total.

03V19300021 May 2003Suspension / Front / Hub
03V1370003 Apr 2003Service Brakes, Air
02V13500220 May 2002Service Brakes, Air / Supply / Check Valve
01V1400042 Aug 2001Steering / Linkages / Tie Rod Assembly
00V24620516 Oct 2000Steering / Linkages / Drag / Link / Connection
00V23230121 Aug 2000Service Brakes, Air / Antilock
00V23240121 Aug 2000Service Brakes, Air / Antilock
00V1760003 Jul 2000Service Brakes, Hydraulic / Antilock/Traction Control/Electronic Limited Slip

03V193000Received 21 May 2003. 2,163 units.
Suspension / Front / Hub
Defect, in the NHTSA record
On certain heavy and medium duty trucks and buses equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Consequence, in the NHTSA record
Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy, in the NHTSA record
Dealers will replace all front axle hubs. Owner notification began on november 12, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK & ENGINE CORPORATION. Manufacturer campaign number 03510. Owner notification date in the NHTSA record: 12 Nov 2003.
03V137000Received 3 Apr 2003. 2,818 units.
Service Brakes, Air
Defect, in the NHTSA record
On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence, in the NHTSA record
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy, in the NHTSA record
Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began on april 18, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK & ENGINE CORPORATION. Manufacturer campaign number 02506. Owner notification date in the NHTSA record: 18 Apr 2003.
02V135002Received 20 May 2002. 108,560 units.
Service Brakes, Air / Supply / Check Valve
Defect, in the NHTSA record
On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence, in the NHTSA record
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy, in the NHTSA record
Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began september 11, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 02506. Owner notification date in the NHTSA record: 11 Nov 2002.
01V140004Received 2 Aug 2001. 18,348 units.
Steering / Linkages / Tie Rod Assembly
Defect, in the NHTSA record
Vehicle description: heavy duty trucks equipped with axle assemblies which may have been manufactured with trw model 20edl ball sockets/drag links. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Consequence, in the NHTSA record
If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Remedy, in the NHTSA record
Dealers will replace the drag link assemblies. Owner notification began august 28, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 01510. Owner notification date in the NHTSA record: 28 Aug 2001.
00V246205Received 16 Oct 2000. 15,257 units.
Steering / Linkages / Drag / Link / Connection
Defect, in the NHTSA record
Vehicle description: school and heavy duty trucks equipped with trw drag links. Each drag link assembly contains two 20-edl model ball socket assemblies. Certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket.
Consequence, in the NHTSA record
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy, in the NHTSA record
Dealers will remove and replace affected drag links.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00513. Owner notification date in the NHTSA record: 6 Nov 2000.
00V232301Received 21 Aug 2000. 79,465 units.
Service Brakes, Air / Antilock
Defect, in the NHTSA record
Vehicle description: medium and heavy duty trucks built with bendix air ABS with an ec-17 1030r electronic control unit (ECU). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Consequence, in the NHTSA record
This condition could cause the ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy, in the NHTSA record
Dealers will replace the ABS ECU.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00510. Owner notification date in the NHTSA record: 31 Jan 2001.
00V232401Received 21 Aug 2000. 62,480 units.
Service Brakes, Air / Antilock
Defect, in the NHTSA record
Vehicle description: tractors built with bendix air ABS with an ec-17 1030r electronic control unit (ECU). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Consequence, in the NHTSA record
This condition could cause the ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy, in the NHTSA record
Dealers will replace the ABS ECU.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00511. Owner notification date in the NHTSA record: 19 Apr 2001.
00V176000Received 3 Jul 2000. 104,302 units.
Service Brakes, Hydraulic / Antilock/Traction Control/Electronic Limited Slip
Defect, in the NHTSA record
Vehicle description: school and heavy duty trucks built with bendix air ABS. The ABS sensor wires on rotating parts chafes which can lead to a false signal being sent to the bendix ABS electronic control unit (ECU).
Consequence, in the NHTSA record
This could cause the air ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels.
Remedy, in the NHTSA record
Dealers will inspect the sensor wiring routing and re-route or replace the ABS sensors as required.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00505. Owner notification date in the NHTSA record: 12 Jul 2000.

The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

Complaints by component

The NHTSA complaint file has no complaint for this model year.

Investigations

The NHTSA investigation file has no investigation that names this model year.

Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.

Other model years

The number under each year is the number of recall campaigns.

A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.

Follow by RSS:Vehicle recalls

Official channels

NHTSA VIN lookupNHTSA shows the unrepaired recalls of one vehicle from its VIN or its license plate.
NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.
NHTSA page of the 2000 International Harvester 8000The recalls, the complaints and the investigations that NHTSA shows for this model year.

Cite this page

Recall Register. 2000 International Harvester 8000: recalls and complaints. https://recallregister.com/vehicle/international-harvester/8000/2000/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through 30 Sep 2026.

Sources

Source: NHTSA Office of Defects Investigation
Licence: US government work, public domain
Recall file through: 30 Sep 2026
Complaint file through: 30 Sep 2026
First complaint in the file: 1 Jan 1995
Manufacturer in the recall file: INTERNATIONAL TRUCK & ENGINE CORPORATION

The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.

Questions

How many units are in the recall campaigns for the 2000 International Harvester 8000?: 393,393 units in 8 campaigns. A campaign can name other models and model years, and its units include them.
How many recall campaigns does the International Harvester 8000 have for all model years?: NHTSA lists 8 recall campaigns for the International Harvester 8000, model years 1998 to 2001. 8 of them name the 2000 model year.
Is an NHTSA investigation of the 2000 International Harvester 8000 open?: The NHTSA investigation file has no investigation that names this model year.