1999 International Harvester 5000: recalls and complaints

NHTSA lists 6 recall campaigns for the 1999 International Harvester 5000. The newest campaign is 03V137000. NHTSA received the report on 3 Apr 2003. The NHTSA record gives the component Service Brakes, Air. NHTSA has 1 complaint on file for this model year.

The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.

This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.

Remedy of the newest campaign, 03V137000, in the NHTSA record

Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began on april 18, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.

NHTSA VIN lookup

Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.
NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on 1 Oct 2026. Complaint file through 30 Sep 2026. Recall file through 30 Sep 2026.

Since the last update

No tracked figure of this page changed in a data update. What the log tracks

All updates to the register

Recall campaigns

6 campaigns, newest first. 299,681 units in total.

03V1370003 Apr 2003Service Brakes, Air
02V13500220 May 2002Service Brakes, Air / Supply / Check Valve
01V1400042 Aug 2001Steering / Linkages / Tie Rod Assembly
00V23230121 Aug 2000Service Brakes, Air / Antilock
00V23240121 Aug 2000Service Brakes, Air / Antilock
00V2060001 Aug 2000Vehicle Speed Control

03V137000Received 3 Apr 2003. 2,818 units.
Service Brakes, Air
Defect, in the NHTSA record
On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence, in the NHTSA record
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy, in the NHTSA record
Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began on april 18, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK & ENGINE CORPORATION. Manufacturer campaign number 02506. Owner notification date in the NHTSA record: 18 Apr 2003.
02V135002Received 20 May 2002. 108,560 units.
Service Brakes, Air / Supply / Check Valve
Defect, in the NHTSA record
On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence, in the NHTSA record
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy, in the NHTSA record
Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began september 11, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 02506. Owner notification date in the NHTSA record: 11 Nov 2002.
01V140004Received 2 Aug 2001. 18,348 units.
Steering / Linkages / Tie Rod Assembly
Defect, in the NHTSA record
Vehicle description: heavy duty trucks equipped with axle assemblies which may have been manufactured with trw model 20edl ball sockets/drag links. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Consequence, in the NHTSA record
If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Remedy, in the NHTSA record
Dealers will replace the drag link assemblies. Owner notification began august 28, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 01510. Owner notification date in the NHTSA record: 28 Aug 2001.
00V232301Received 21 Aug 2000. 79,465 units.
Service Brakes, Air / Antilock
Defect, in the NHTSA record
Vehicle description: medium and heavy duty trucks built with bendix air ABS with an ec-17 1030r electronic control unit (ECU). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Consequence, in the NHTSA record
This condition could cause the ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy, in the NHTSA record
Dealers will replace the ABS ECU.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00510. Owner notification date in the NHTSA record: 31 Jan 2001.
00V232401Received 21 Aug 2000. 62,480 units.
Service Brakes, Air / Antilock
Defect, in the NHTSA record
Vehicle description: tractors built with bendix air ABS with an ec-17 1030r electronic control unit (ECU). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Consequence, in the NHTSA record
This condition could cause the ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy, in the NHTSA record
Dealers will replace the ABS ECU.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00511. Owner notification date in the NHTSA record: 19 Apr 2001.
00V206000Received 1 Aug 2000. 28,010 units.
Vehicle Speed Control
Defect, in the NHTSA record
Vehicle description: heavy duty trucks. The brake light switch and the cruise control switch are mounted in such a way as to allow moisture within the air brake system to collect inside the switches. If the moisture in the switches freezes, the brake lights may not function and the cruise control might not disengage when the brake pedal is depressed.
Consequence, in the NHTSA record
If the switches freeze, the results could be no brake lights to warn following vehicles and an extended stopping distance if the cruise control does not disengage as expected when the brake pedal is pressed.
Remedy, in the NHTSA record
Dealers will re-mount the air manifold and switches to a proven, trouble-free orientation.
Report filed by INTERNATIONAL TRUCK AND ENGINE. Manufacturer campaign number 00506. Owner notification date in the NHTSA record: 14 Aug 2000.

The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

Complaints by component

1 complaint, 1 component mentions.

A complaint can name more than one component. Each component that a complaint names is one component mention. This model year has fewer than 50 component mentions, so the table shows the number of mentions only.

1999 International Harvester 5000: component mentions in complaints
Component		Mentions
Suspension		1

Complaints that report a crash: 0
Complaints that report a fire: 0
Injuries in the complaints: 0
Deaths in the complaints: 0
Date of the newest complaint: 14 Jun 2000

These figures are the entries of the persons who sent the complaints.

Complaint: A report about a possible safety problem that a person sends to NHTSA. This site shows the number of complaints and not their text.

Complaints about the 1999 International Harvester 5000, by the year NHTSA received them. The largest year is 2000, with 1 complaint.

Investigations

The NHTSA investigation file has no investigation that names this model year.

Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.

Other model years

The number under each year is the number of recall campaigns.

19721
19731
19961
19971
19985
19996
20007
20012

A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.

Follow by RSS:Vehicle recalls

Official channels

NHTSA VIN lookupNHTSA shows the unrepaired recalls of one vehicle from its VIN or its license plate.
NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.
NHTSA page of the 1999 International Harvester 5000The recalls, the complaints and the investigations that NHTSA shows for this model year.

Cite this page

Recall Register. 1999 International Harvester 5000: recalls and complaints. https://recallregister.com/vehicle/international-harvester/5000/1999/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through 30 Sep 2026.

Sources

Source: NHTSA Office of Defects Investigation
Licence: US government work, public domain
Recall file through: 30 Sep 2026
Complaint file through: 30 Sep 2026
First complaint in the file: 1 Jan 1995
Manufacturer in the recall file: INTERNATIONAL TRUCK & ENGINE CORPORATION

The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.

Questions

How many units are in the recall campaigns for the 1999 International Harvester 5000?: 299,681 units in 6 campaigns. A campaign can name other models and model years, and its units include them.
How many recall campaigns does the International Harvester 5000 have for all model years?: NHTSA lists 10 recall campaigns for the International Harvester 5000, model years 1972 to 2001. 6 of them name the 1999 model year.
Which component do the complaints about the 1999 International Harvester 5000 name most often?: Suspension: 1 of 1 component mention.
Is an NHTSA investigation of the 1999 International Harvester 5000 open?: The NHTSA investigation file has no investigation that names this model year.