Recall Register

2020 Altec Digger Derrick: recalls and complaints

NHTSA lists 11 recall campaigns for the 2020 Altec Digger Derrick. The newest campaign is 25V562000. NHTSA received the report on 29 Aug 2025. The NHTSA record gives the component Structure / Frame and Members. NHTSA has no complaint on file for this model year.

The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.

This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.

Remedy of the newest campaign, 25V562000, in the NHTSA record

Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
NHTSA VIN lookup

Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.

NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .

Since the last update

No tracked figure of this page changed in a data update. What the log tracks

All updates to the register

Recall campaigns

11 campaigns, newest first. 10,282 units in total.

  1. 25V562000Received . 903 units.

    Structure / Frame and Members

    Defect, in the NHTSA record
    Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
    Consequence, in the NHTSA record
    A cable step that fails during use increases the risk of injury.
    Remedy, in the NHTSA record
    Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN-3246. Owner notification date in the NHTSA record: .

  2. 23V636000Received . 53 units.

    Equipment / Mechanical / Winch

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
    Consequence, in the NHTSA record
    An uncontrolled load falling increases the risk of injury to personnel or others nearby.
    Remedy, in the NHTSA record
    Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number MAB 3113. Owner notification date in the NHTSA record: .

  3. 23V326000Received . 353 units.

    Equipment / Mechanical

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2017-2022 DC, DB, DL, DM, DH, DT, and D2/3/4000 Digger Derricks. The hardware that secures the removable auger hex extension bar to the drive unit coupler was not installed, which may cause it to detach.
    Consequence, in the NHTSA record
    An auger extension bar that detaches while the digger drive unit is deployed, can increase the risk of injury to nearby personnel.
    Remedy, in the NHTSA record
    Altec will provide instructions for owners to inspect the auger extension assembly for missing hardware. If hardware is found to be missing, a replacement kit will be provided by Altec, free of charge. Owner notification letters are expected to be mailed June 30, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3076.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN 3076. Owner notification date in the NHTSA record: .

  4. 23V216000Received . 1,967 units.

    Structure / Body

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
    Consequence, in the NHTSA record
    A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
    Remedy, in the NHTSA record
    Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN 3064. Owner notification date in the NHTSA record: .

  5. 22V349000Received . 477 units.

    Equipment / Mechanical / Boom/Crane/Ladder / Controls/Control Wiring

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2016-2022 E-series & DH-H series Digger Derricks. The relay connectors may have been reattached to the incorrect plug after a stability test was performed. If the connections are not correct, the hydraulic overload protection system will not function.
    Consequence, in the NHTSA record
    A nonfunctional overload protection system may result in the operator unknowingly overloading the system, increasing the risk of injury.
    Remedy, in the NHTSA record
    Altec will inspect and reattach the connectors, if necessary, free of charge. Owner notification letters were mailed on June 29, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 858.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN 858. Owner notification date in the NHTSA record: .

  6. 22V071000Received . 167 units.

    Equipment / Mechanical / Boom/Crane/Ladder

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2018-2021 DC and DM Series Digger Derricks and AM series Aerial Devices. The unit subbase may develop cracks in the bulkhead plate, which can cause the shear plates to fail.
    Consequence, in the NHTSA record
    Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.
    Remedy, in the NHTSA record
    Altec will inspect the bulkhead plate, and add a reinforcement plate, free of charge. Owner notification letters were mailed on April 8, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 851.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN 851. Owner notification date in the NHTSA record: .

  7. 21V559000Received . 878 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2016-2021 DH, D3000, DT65, and DT85 Digger Derricks. The operator may inadvertently move the pole guide joystick with their forearm due to the close proximity between the controls.
    Consequence, in the NHTSA record
    An unintentionally engaged joystick could result in uncontrolled movement of an unbalanced load, increasing the risk of injury.
    Remedy, in the NHTSA record
    Altec will provide a guard kit to install over the pole guide controls, free of charge. Owner notification letters were mailed on September 15, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 829.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN 829. Owner notification date in the NHTSA record: .

  8. 20V765000Received . 4,987 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2018-2020 AA, AM, AN, A-Class, TA, DM, DL, DXXXX, DC, and DT digger derricks and aerial device vehicles equipped with a DC pump. A hydraulic check valve can have a snap ring failure resulting in the snap ring becoming lodged in a counterbalance or control valve allowing continued movement.
    Consequence, in the NHTSA record
    Unintended boom movement may result in potential injury and or property damage.
    Remedy, in the NHTSA record
    Altec will notify owners, and dealers will replace the valve's snap ring, free of charge. The recall began February 9, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 787.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN 787. Owner notification date in the NHTSA record: .

  9. 20V587000Received . 280 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries Inc. (Altec) is recalling certain 2019-2020 AA55, AM50, A77-T Aerial Devices and D2/3/4B, D3E, DHB, DHH and DHE Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5252) may fail.
    Consequence, in the NHTSA record
    If the fasteners break, the pedestal may separate from the turntable, increasing the risk of injury or death.
    Remedy, in the NHTSA record
    Altec will notify owners, and dealers will provide replacement fasteners if necessary, free of charge. This recall began October 29, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 778.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 778. Owner notification date in the NHTSA record: .

  10. 20V282000Received . 157 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries Inc. (Altec) is recalling certain 2018-2020 AA55, AM50 and A77 Aerial Devices and D2, D3, D4, DH-B and DH-H Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5185) may fail.
    Consequence, in the NHTSA record
    If the fasteners break, the pedestal may separate from turntable, increasing the risk of injury or death.
    Remedy, in the NHTSA record
    Altec will notify owners and will provide replacement fasteners if necessary, free of charge. This recall began July 2, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 760.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 760. Owner notification date in the NHTSA record: .

  11. 20V174000Received . 60 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries Inc. (Altec) is recalling certain 2019-2020 DT65-E, D3000-E, and DH-E Digger Derricks Aerial devices. Operators could inadvertently open the pole guide while performing other tasks, possibly resulting in a loss of control of the load.
    Consequence, in the NHTSA record
    If the pole guide is opened while performing other operations, the pole may become unbalanced and cause loss of control of the load, increasing the risk of injury or death.
    Remedy, in the NHTSA record
    Altec will notify owners and will install a guard kit over the pole guide controls, free of charge. The recall began May 5, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 754.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 754. Owner notification date in the NHTSA record: .

The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

Complaints by component

The NHTSA complaint file has no complaint for this model year.

Investigations

The NHTSA investigation file has no investigation that names this model year.

Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.

Other model years

The number under each year is the number of recall campaigns.

  1. 19921
  2. 19931
  3. 19941
  4. 19951
  5. 19961
  6. 19971
  7. 19981
  8. 19991
  9. 20002
  10. 20012
  11. 20022
  12. 20033
  13. 20044
  14. 20054
  15. 20064
  16. 20074
  17. 20085
  18. 20098
  19. 20108
  20. 201111
  21. 201211
  22. 20139
  23. 20148
  24. 20158
  25. 201615
  26. 201715
  27. 201818
  28. 201914
  29. 202011
  30. 202111
  31. 202212
  32. 202313
  33. 202411
  34. 202513
  35. 20264

A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.

Official channels

Cite this page

Recall Register. 2020 Altec Digger Derrick: recalls and complaints. https://recallregister.com/vehicle/altec/digger-derrick/2020/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .

Sources

Source
NHTSA Office of Defects Investigation
Licence
US government work, public domain
Recall file through
30 Sep 2026
Complaint file through
30 Sep 2026
First complaint in the file
1 Jan 1995
Manufacturer in the recall file
Altec Industries, Inc.

The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.

Questions

How many units are in the recall campaigns for the 2020 Altec Digger Derrick?
10,282 units in 11 campaigns. A campaign can name other models and model years, and its units include them.
How many recall campaigns does the Altec Digger Derrick have for all model years?
NHTSA lists 52 recall campaigns for the Altec Digger Derrick, model years 1992 to 2026. 11 of them name the 2020 model year.
Is an NHTSA investigation of the 2020 Altec Digger Derrick open?
The NHTSA investigation file has no investigation that names this model year.