Recall Register

2010 Altec Digger Derrick: recalls and complaints

NHTSA lists 8 recall campaigns for the 2010 Altec Digger Derrick. The newest campaign is 23V636000. NHTSA received the report on 14 Sep 2023. The NHTSA record gives the component Equipment / Mechanical / Winch. NHTSA has no complaint on file for this model year.

The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.

This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.

Remedy of the newest campaign, 23V636000, in the NHTSA record

Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.
NHTSA VIN lookup

Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.

NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .

Since the last update

No tracked figure of this page changed in a data update. What the log tracks

All updates to the register

Recall campaigns

8 campaigns, newest first. 17,707 units in total.

  1. 23V636000Received . 53 units.

    Equipment / Mechanical / Winch

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
    Consequence, in the NHTSA record
    An uncontrolled load falling increases the risk of injury to personnel or others nearby.
    Remedy, in the NHTSA record
    Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number MAB 3113. Owner notification date in the NHTSA record: .

  2. 19V365000Received . 1,036 units.

    Equipment / Other / Labels

    Defect, in the NHTSA record
    Altec Industries Inc. (Altec) is recalling certain 2009-2019 DL/DM, DL/DMB, DH, D/2/3/4, and DC Digger Derrick vehicles. The slope indicator placard card may falsely indicate that the unit could be used without leveling on a 5 degree slope.
    Consequence, in the NHTSA record
    An operator may improperly set up the unit, making the unit unstable, thus increasing the risk of injury.
    Remedy, in the NHTSA record
    Altec will notify owners, and issue CSN 719 to owners, instructing them to remove the incorrect placards, free of charge. The recall began July 2, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 719.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 719. Owner notification date in the NHTSA record: .

  3. 19V127000Received . 14,389 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries, Inc (Altec) is recalling certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles. The pedestal tube welds may crack over time.
    Consequence, in the NHTSA record
    Unrepaired cracks may result in failure of the pedestal and uncontrolled movement increasing the risk of injury.
    Remedy, in the NHTSA record
    Altec will notify owners and will provide repairs as necessary and a reinforcing kit. The recall began April 3, 2019. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 713.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 713. Owner notification date in the NHTSA record: .

  4. 18V791000Received . 331 units.

    Electrical System / Wiring / Fuses and Circuit Breakers

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2008-2018 Altec AC18, AC23, AC26, AC30 and AC38 Cranes and D2B, D3A, D4A/B, DL42B, DT65 and DT80 Digger Derrick vehicles. The wiring on the 12V circuit from the chassis battery to the Power Distribution Module (PDM) may be insufficiently sized.
    Consequence, in the NHTSA record
    The insufficiently sized wire may overheat, increasing the risk of fire.
    Remedy, in the NHTSA record
    Altec will notify owners, and dealers will replace the wiring to the PDM, with a larger wire and/or replace the circuit breaker, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 703.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 703. Owner notification date in the NHTSA record: .

  5. 14V503000Received . 51 units.

    Electrical System / 12v/24v/48v Battery

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain model year 2000-2013 Aerial Device and Digger Derrick trucks, equipped with Sure Power Battery Equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
    Consequence, in the NHTSA record
    Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.
    Remedy, in the NHTSA record
    Altec will notify owners, and dealers will replace any affected battery equalizer, free of charge. The recall is expected to begin in September 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 603.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 603. Owner notification date in the NHTSA record: .

  6. 13V636000Received . 661 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries Inc. (Altec) is recalling certain model year 2009-2013 DT80, and model year 2011-2013 D2, D3 and D4 digger derrick models manufactured June 2009 through November 2013. The fasteners that hold the bracket for the feeder tube (the telescopic hydraulic tube that supplies pump flow to the auger) may become loose allowing the feeder tube to fall.
    Consequence, in the NHTSA record
    A falling feeder tube increases the risk of injury to people nearby.
    Remedy, in the NHTSA record
    Altec will notify owners, and Altec service centers will install an upgraded feeder tube bracket and mounting hardware, free of charge. The recall began on February 19, 2014. Owners may contact Altec at 1-877-462-5832. Altec's number for this recall is CSN 591.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 591. Owner notification date in the NHTSA record: .

  7. 13V141000Received . 1,057 units.

    Equipment

    Defect, in the NHTSA record
    Altec Industries, Inc (Altec) is recalling certain model year 2007-2012 DC, and DL/DM Digger Derrick utility trucks, equipped with boom tip winches using Tulsa Winch Group (formerly Gear Products) winch drums. In the affected vehicles, the winch drum could deform or fracture.
    Consequence, in the NHTSA record
    If the winch fails while in use, it could cause personal injury.
    Remedy, in the NHTSA record
    Altec will notify owners and dealers will replace the winch drum, free of charge. The recall began on June 10, 2013. Altec's recall campaign number is CSN 574.

    Report filed by Altec Industries Inc.. Manufacturer campaign number CSN 574. Owner notification date in the NHTSA record: .

  8. 11V600000Received . 129 units.

    Equipment / Electrical

    Defect, in the NHTSA record
    Altec is recalling certain model year 2008 through 2011 utility vehicles equipped with sure power battery separator devices, part number 16511893 (model 1314) or 16512967 (model 1315). The battery separator can overheat.
    Consequence, in the NHTSA record
    Overheating of the battery separator can result in smoke and possible fire.
    Remedy, in the NHTSA record
    Altec will notify owners and replace the batter separators free of charge. The safety recall began on january 11, 2012. Owners may contact altec at 1-877-462-5832.

    Report filed by ALTEC INDUSTRIES INC.. Manufacturer campaign number CSN 554. Owner notification date in the NHTSA record: .

The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

Complaints by component

The NHTSA complaint file has no complaint for this model year.

Investigations

The NHTSA investigation file has no investigation that names this model year.

Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.

Other model years

The number under each year is the number of recall campaigns.

  1. 19921
  2. 19931
  3. 19941
  4. 19951
  5. 19961
  6. 19971
  7. 19981
  8. 19991
  9. 20002
  10. 20012
  11. 20022
  12. 20033
  13. 20044
  14. 20054
  15. 20064
  16. 20074
  17. 20085
  18. 20098
  19. 20108
  20. 201111
  21. 201211
  22. 20139
  23. 20148
  24. 20158
  25. 201615
  26. 201715
  27. 201818
  28. 201914
  29. 202011
  30. 202110
  31. 202211
  32. 202312
  33. 202410
  34. 202512
  35. 20263

A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.

Official channels

Cite this page

Recall Register. 2010 Altec Digger Derrick: recalls and complaints. https://recallregister.com/vehicle/altec/digger-derrick/2010/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .

Sources

Source
NHTSA Office of Defects Investigation
Licence
US government work, public domain
Recall file through
29 Sep 2026
Complaint file through
29 Mar 2018
First complaint in the file
1 Jan 1995
Manufacturer in the recall file
Altec Industries, Inc.

The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.

Questions

How many units are in the recall campaigns for the 2010 Altec Digger Derrick?
17,707 units in 8 campaigns. A campaign can name other models and model years, and its units include them.
How many recall campaigns does the Altec Digger Derrick have for all model years?
NHTSA lists 51 recall campaigns for the Altec Digger Derrick, model years 1992 to 2026. 8 of them name the 2010 model year.
Is an NHTSA investigation of the 2010 Altec Digger Derrick open?
The NHTSA investigation file has no investigation that names this model year.