Imt: equipment recalls

1. 23E042000Received 31 May 2023. 13 units.

   Equipment

   Defect, in the NHTSA record

   Iowa Mold Tooling., Inc. (IMT) is recalling certain IMT Hydraulic Loaders model, 50-345, part number, 6390121. The stabilizer beams may have welds that crack over time and break under load.

   Consequence, in the NHTSA record

   A broken stabilizer beam can cause the vehicle to tip, or disengage the load, increasing the risk of injury.

   Remedy, in the NHTSA record

   Dealers will replace the stabilizer beams, free of charge. Owner notification letters were mailed July 27, 2023. Owners may contact IMT customer service at 1-877-751-4222.

   Products named: Imt Imt Stabilizer Beam.

   Report filed by Iowa Mold Tooling Co., Inc.. Owner notification date in the NHTSA record: 27 Jul 2023.

2. 22E067000Received 15 Aug 2022. 31 units.

   Equipment

   Defect, in the NHTSA record

   Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Hydraulic Loaders, model 42684 and part number 6390121. The welds on the stabilizer beams may crack over time, or break under load.

   Consequence, in the NHTSA record

   A cracked or broken stabilizer beam can cause the vehicle to tip, or disengage the load, increasing the risk of injury.

   Remedy, in the NHTSA record

   Dealers will replace the stabilizer beams, free of charge. Vehicle manufacturers were notified September 23, 2022. Owners may contact IMT customer service at 1-877-751-4222. IMT's number for this recall is TB2022001-IMY dist.

   Products named: Imt 42684.

   Report filed by Iowa Mold Tooling Co., Inc.. Manufacturer campaign number TB2022001 - IMT dist. Owner notification date in the NHTSA record: 23 Sep 2022.

3. 18E105000Received 16 Nov 2018. 20 units.

   Electrical System

   Defect, in the NHTSA record

   Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Omnex Proportional Wireless Transmitters, part numbers 70733882 and 70733883, used for controlling cranes. These wireless transmitters have a diode that can fail, possibly causing the crane to move in an unintended manner.

   Consequence, in the NHTSA record

   If the crane moves in a way that was not intended, it can increase the risk of injury to those nearby.

   Remedy, in the NHTSA record

   IMT will notify owners, and IMT Distributors will replace the transmitter, free of charge. The recall began January 14, 2019. Owners may contact IMT customer service at 1-800-554-4421.

   Products named: Imt Wireless Transmitter.

   Report filed by Iowa Mold Tooling Co., Inc.. Owner notification date in the NHTSA record: 14 Jan 2019.

4. 17E067000Received 13 Nov 2017. 19 units.

   Equipment

   Defect, in the NHTSA record

   Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Dominator I Crane bodies sold for installation onto other chassis. These cranes have incorrect stabilizer arm locking pins that may not engage properly allowing the stabilizer arm to extend from the side of the vehicle while traveling.

   Consequence, in the NHTSA record

   If the locking arm pin does not engage, the stabilizer arm may extend while the vehicle is in motion, increasing the risk of a crash.

   Remedy, in the NHTSA record

   IMT will notify owners, and dealers will replace the incorrect pin with a correct length pin, free of charge. The recall began on December 20, 2017. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2017008.

   Products named: Imt Dominator I Crane Body.

   Report filed by Iowa Mold Tooling Co., Inc.. Manufacturer campaign number TB2017008. Owner notification date in the NHTSA record: 20 Dec 2017.

5. 16E012000Received 17 Feb 2016. 1,598 units.

   Equipment

   Defect, in the NHTSA record

   Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.

   Consequence, in the NHTSA record

   If the valve bank cover detaches from the crane it could be a road hazard, increasing the risk of a crash.

   Remedy, in the NHTSA record

   IMT will notify owners, and dealers will replace the valve cover with a thicker cover, free of charge. The recall is expected to begin during March 2016. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2016001.

   Products named: Imt 14000 Series Iii Crane; Imt 10000 Series Iii Crane; Imt 7500 Series Iii Crane; Imt 8600 Series Iii Crane; Imt 12000 Series Iii Crane; Imt 6000 Series Iii Crane; Imt 9500 Series Iii Crane.

   Report filed by Iowa Mold Tooling Co., Inc.. Manufacturer campaign number TB2016001. Owner notification date in the NHTSA record: 7 Apr 2016.

6. 06E013000Received 9 Feb 2006. 1,779 units.

   Suspension / Rear / Axle / Spindle

   Defect, in the NHTSA record

   Certain imt axles with f24 spindles manufactured between february and november 2005 and installed as original equipment on trailers. Due to improper material used on the axle spindle the spindle can bend or break causing the wheel end to come loose.

   Consequence, in the NHTSA record

   While braking, the spindle can break allowing the wheel to separate from the trailer, possibly resulting in a vehicle crash.

   Remedy, in the NHTSA record

   The owners will be notified by the vehicle manufactured and the axles will be replaced free of charge.

   Products named: Imt F24 Spindle.

   Report filed by IMT CORPORATION.

7. 98E042000Received 10 Dec 1998. 160 units.

   Wheels / Hubcap/Cover

   Defect, in the NHTSA record

   Equipment description: 15" brake spiders that are part of the rear braking system on certain highway trailers and is also used on axles with 19.5" tires. These brake spiders can fracture or crack as a result of fatigue stress.

   Consequence, in the NHTSA record

   This condition would impair the braking system on the vehicle, increasing the risk of a crash.

   Remedy, in the NHTSA record

   Owners will be instructed to inspect these wheels, and replace, if necessary.

   Products named: Imt Brake Spider.

   Report filed by IMT CORPORATION.

The campaign number opens the NHTSA record.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

• 10000 Series Iii Crane1
• 12000 Series Iii Crane1
• 14000 Series Iii Crane1
• 426841
• 6000 Series Iii Crane1
• 7500 Series Iii Crane1
• 8600 Series Iii Crane1
• 9500 Series Iii Crane1
• Brake Spider1
• Dominator I Crane Body1
• F24 Spindle1
• Imt Stabilizer Beam1
• Wireless Transmitter1

• All other equipment brands
• Imt: vehicle recalls
• Icon2
• Ideal Connection2
• Ifs3
• II Much2
• Immi4
• Indiana Mills3
• Infiniti8
• Ingersoll2
• International Harvester4
• Interstate2

Follow by RSS:Child seat, tire and equipment recalls

• NHTSA recall lookupNHTSA shows the recalls of a child seat, a tire or equipment by brand and model.
• NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.

Which Imt products do the campaigns name?

The NHTSA records have 13 product names for these campaigns. The name in the most campaigns is: 10000 Series Iii Crane

How many units does a Imt equipment campaign have?

The median Imt campaign has 31 units. The median of all 2,866 equipment campaigns is 1,677 units.

Which component do the Imt campaigns name most often?

Equipment, in 4 campaigns. The component is the first component in the NHTSA record of a campaign.