Immi: equipment recalls

1. 19E050000Received 25 Jul 2019. 344 units.

   Air Bags

   Defect, in the NHTSA record

   Indiana Mills and Manufacturing Inc. (IMMI) is recalling certain Inflatable Head Cushions (IHC) and Knee Air Bags (KAB). Due to improper manufacturing, the cushion of the IHC and/or KAB may detach during a deployment event and not inflate.

   Consequence, in the NHTSA record

   In the event of a crash, if the cushions do not inflate properly, they may not provide the intended protection to the occupant, increasing the risk of injury.

   Remedy, in the NHTSA record

   IMMI will work with vehicle manufacturers to replace the air bag unit with a new unit, free of charge. The recall began on July 23, 2019. Owners may contact IMMI customer service at 1-317-896-9531.

   Products named: Immi Inflatable Head Cushion; Immi Knee Air Bag.

   Report filed by Indiana Mills and Manufacturing Inc..

2. 17E055000Received 2 Oct 2017. 1,185 units.

   Seat Belts

   Defect, in the NHTSA record

   Indiana Mills and Manufacturing Inc. (IMMI) is recalling certain Generation IV School Bus seats, part number 911698. These seats, equipped with 3-point lap and shoulder belts, have a buckle mount rod that may fracture under load. As such, these seats fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

   Consequence, in the NHTSA record

   In the event of a crash, the buckle mount rod may fracture preventing the occupant from being properly restrained, increasing the risk of injury.

   Remedy, in the NHTSA record

   IMMI will notify the school bus manufacturers that purchased the seats, and dealers for those companies will replace the buckle mount rods, free of charge. Owners may contact IMMI customer service at 1-317-896-9531.

   Products named: Immi Gen IV School Bus Seat.

   Report filed by Indiana Mills and Manufacturing Inc.. Owner notification date in the NHTSA record: 2 Oct 2017.

3. 13E061000Received 12 Nov 2013. 74,000 units.

   Seat Belts

   Defect, in the NHTSA record

   Indiana Mills and Manufacturing Inc. (IMMI) has determined that certain seat belt assemblies manufactured from August 2, 2013, through October 31, 2013, fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies." When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, and it may take more effort than specified in the standard to separate the latch plate from the buckle.

   Consequence, in the NHTSA record

   If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.

   Remedy, in the NHTSA record

   IMMI has notified its customers, who are the vehicle and seating manufacturers. It is IMMI's understanding that the vehicle manufacturers will provide replacement buckles, free of charge, to purchasers of vehicles containing the noncompliant seat belt assemblies.

   Products named: Immi Seat Belt Assembly.

   Report filed by Indiana Mills and Manufacturing Inc.. Owner notification date in the NHTSA record: 19 Nov 2013.

4. 09E048000Received 27 Jul 2009. 83 units.

   Air Bags

   Defect, in the NHTSA record

   Immi has identified a safety-related defect in certain side-roll protection systems, as originally installed equipment in various fire trucks and concrete mixers. The sensor designed to detect vehicle roll can malfunction resulting in an inadvertent deployment of the protection system.

   Consequence, in the NHTSA record

   Inadvertent deployment of the side-roll protection system could result in a vehicle crash or injury to an out of position occupant.

   Remedy, in the NHTSA record

   Immi will work with each vehicle manufacturer to develop a remedy plan. The sensors will be replaced at no cost to the owner. The safety recall began on july 31, 2009. Owners may contact either their vehicle manufacturer or immi 1-317-896-9531.

   Products named: Immi Lot 0731.

   Report filed by INDIANA MILLS & MANUFACTURING, INC.. Owner notification date in the NHTSA record: 31 Jul 2009.

The campaign number opens the NHTSA record.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

• Gen IV School Bus Seat1
• Inflatable Head Cushion1
• Knee Air Bag1
• Lot 07311
• Seat Belt Assembly1

• All other equipment brands
• Hyundai7
• Icon2
• Ideal Connection2
• Ifs3
• II Much2
• Imt7
• Indiana Mills3
• Infiniti8
• Ingersoll2
• International Harvester4

Follow by RSS:Child seat, tire and equipment recalls

• NHTSA recall lookupNHTSA shows the recalls of a child seat, a tire or equipment by brand and model.
• NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.

Which Immi products do the campaigns name?

The NHTSA records have 5 product names for these campaigns. The name in the most campaigns is: Gen IV School Bus Seat

How many units does a Immi equipment campaign have?

The median Immi campaign has 1,185 units. The median of all 2,866 equipment campaigns is 1,677 units.

Which component do the Immi campaigns name most often?

Air Bags, in 2 campaigns. The component is the first component in the NHTSA record of a campaign.