2010 Medtec Type II (VAN): recalls and complaints
NHTSA lists 2 recall campaigns for the 2010 Medtec Type II (VAN). The newest campaign is 11V098000. NHTSA received the report on 14 Feb 2011. The NHTSA record gives the component Seats. NHTSA has no complaint on file for this model year.
The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.
This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.
Remedy of the newest campaign, 11V098000, in the NHTSA record
Dealers will install the missing reinforcement plate under the floor substructure free of charge. The recall is expected to begin during march 2011. Owners may contact medtec toll-free at 1-866-263-3832.
Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.
NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .
Since the last update
No tracked figure of this page changed in a data update. What the log tracks
Recall campaigns
2 campaigns, newest first. 285 units in total.
11V098000Received . 87 units.
Seats
- Defect, in the NHTSA record
Medtec is recalling certain model year 2010 ambulance type II vans for not complying with federal motor vehicle safety standard no. 207, "seating systems," and federal motor vehicle safety standard no. 210, "seat belt assembly anchorages." the rear facing ambulance attendant seat utilizes a steel floor reinforcement plate on the bottom side of the aluminum floor substructure and the reinforcement plate was omitted in some ambulance bodies.
- Consequence, in the NHTSA record
In the event of a crash, the seat belt assembly anchorage may disconnect from the floor causing the assembly to fail to restrain the seat occupant increasing the risk of injury to that occupant.
- Remedy, in the NHTSA record
Dealers will install the missing reinforcement plate under the floor substructure free of charge. The recall is expected to begin during march 2011. Owners may contact medtec toll-free at 1-866-263-3832.
Report filed by MEDTEC AMBULANCE CORPORATION. Manufacturer campaign number 11.03. Owner notification date in the NHTSA record: .
10V511000Received . 198 units.
Seat Belts
- Defect, in the NHTSA record
Medtec is recalling certain model year 2007 through 2010 ambulances manufactured from september 14, 2007, through april 15, 2010. The rear facing ambulance attendant seat was not equipped with a type 2 seat belt assembly, and so the vehicles fail to comform to the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection."
- Consequence, in the NHTSA record
Use of an improper seat belt assembly may increase the risk of injury to the seat occupant in the event of a crash.
- Remedy, in the NHTSA record
Medtec will notify owners and dealers will install a type 2 seat belt assembly free of charge. The safety recall began on december 6, 2010. Owners may contact medtec toll-free at 1-866-263-3832.
Report filed by MEDTEC AMBULANCE CORPORATION. Owner notification date in the NHTSA record: .
The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.
Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.
Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.
Complaints by component
The NHTSA complaint file has no complaint for this model year.
Investigations
The NHTSA investigation file has no investigation that names this model year.
Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.
Other model years
The number under each year is the number of recall campaigns.
- 20071
- 20081
- 20091
- 20102
A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.
Follow by RSS:Vehicle recalls
Official channels
- NHTSA VIN lookupNHTSA shows the unrepaired recalls of one vehicle from its VIN or its license plate.
- NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.
- NHTSA page of the 2010 Medtec Type II (VAN)The recalls, the complaints and the investigations that NHTSA shows for this model year.
Cite this page
Recall Register. 2010 Medtec Type II (VAN): recalls and complaints. https://recallregister.com/vehicle/medtec/type-ii-van/2010/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .
Sources
- Source
- NHTSA Office of Defects Investigation
- Licence
- US government work, public domain
- Recall file through
- 29 Sep 2026
- Complaint file through
- 29 Mar 2018
- First complaint in the file
- 1 Jan 1995
- Manufacturer in the recall file
- MEDTEC AMBULANCE CORPORATION
The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.
Questions
- How many units are in the recall campaigns for the 2010 Medtec Type II (VAN)?
- 285 units in 2 campaigns. A campaign can name other models and model years, and its units include them.
- How many recall campaigns does the Medtec Type II (VAN) have for all model years?
- NHTSA lists 2 recall campaigns for the Medtec Type II (VAN), model years 2007 to 2010. 2 of them name the 2010 model year.
- Is an NHTSA investigation of the 2010 Medtec Type II (VAN) open?
- The NHTSA investigation file has no investigation that names this model year.