2016 IMT Dominator: recalls and complaints
NHTSA lists 2 recall campaigns for the 2016 IMT Dominator. The newest campaign is 17V515000. NHTSA received the report on 18 Aug 2017. The NHTSA record gives the component Electrical System. NHTSA has no complaint on file for this model year.
The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.
This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.
Remedy of the newest campaign, 17V515000, in the NHTSA record
IMT will notify owners, and dealers will replace the jump start kit mounting bracket, thereby relocating the fuse block, free of charge. The recall began on September 29, 2017. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2017006.
Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.
NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .
Since the last update
No tracked figure of this page changed in a data update. What the log tracks
Recall campaigns
2 campaigns, newest first. 860 units in total.
17V515000Received . 38 units.
Electrical System
- Defect, in the NHTSA record
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain 2016-2017 Dominator Contractor series trucks built on 2017 Ford Super Duty chassis. These vehicles are equipped with a front jump start plug kit installed under the hood at the chassis battery. The fuse block for this kit may contact the hood creating an electrical short.
- Consequence, in the NHTSA record
An electrical short can increase the risk of a fire.
- Remedy, in the NHTSA record
IMT will notify owners, and dealers will replace the jump start kit mounting bracket, thereby relocating the fuse block, free of charge. The recall began on September 29, 2017. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2017006.
Report filed by Iowa Mold Tooling Co., Inc.. Manufacturer campaign number TB2017006. Owner notification date in the NHTSA record: .
16V088000Received . 822 units.
Equipment
- Defect, in the NHTSA record
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover that may crack and fall from the crane while the vehicle is being driven.
- Consequence, in the NHTSA record
If the valve bank cover detaches from the crane it could be a road hazard, increasing the risk of a crash.
- Remedy, in the NHTSA record
IMT will notify owners, and dealers will replace the valve bank cover with a thicker one, free of charge. The recall began on April 6, 2016. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2016002.
Report filed by Iowa Mold Tooling Co., Inc.. Manufacturer campaign number TB2016002. Owner notification date in the NHTSA record: .
The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.
Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.
Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.
Complaints by component
The NHTSA complaint file has no complaint for this model year.
Investigations
The NHTSA investigation file has no investigation that names this model year.
Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.
Other model years
The number under each year is the number of recall campaigns.
- 20131
- 20141
- 20151
- 20162
- 20171
A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.
Follow by RSS:Vehicle recalls
Official channels
- NHTSA VIN lookupNHTSA shows the unrepaired recalls of one vehicle from its VIN or its license plate.
- NHTSA: report a safety problemThe NHTSA form for a complaint about a vehicle, a tire, a child seat or equipment.
- NHTSA page of the 2016 IMT DominatorThe recalls, the complaints and the investigations that NHTSA shows for this model year.
Cite this page
Recall Register. 2016 IMT Dominator: recalls and complaints. https://recallregister.com/vehicle/imt/dominator/2016/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .
Sources
- Source
- NHTSA Office of Defects Investigation
- Licence
- US government work, public domain
- Recall file through
- 29 Sep 2026
- Complaint file through
- 29 Mar 2018
- First complaint in the file
- 1 Jan 1995
- Manufacturer in the recall file
- Iowa Mold Tooling Co., Inc.
The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.
Questions
- How many units are in the recall campaigns for the 2016 IMT Dominator?
- 860 units in 2 campaigns. A campaign can name other models and model years, and its units include them.
- How many recall campaigns does the IMT Dominator have for all model years?
- NHTSA lists 2 recall campaigns for the IMT Dominator, model years 2013 to 2017. 2 of them name the 2016 model year.
- Is an NHTSA investigation of the 2016 IMT Dominator open?
- The NHTSA investigation file has no investigation that names this model year.