Recall Register

2025 Altec AC Series Crane: recalls and complaints

NHTSA lists 2 recall campaigns for the 2025 Altec AC Series Crane. The newest campaign is 26V384000. NHTSA received the report on 11 Jun 2026. The NHTSA record gives the component Equipment / Mechanical / Boom/Crane/Ladder / Critical Fasteners. NHTSA has no complaint on file for this model year.

The NHTSA recall file shows no do-not-drive advisory and no park-outside advisory on these campaigns.

This page cannot show if a recall applies to one vehicle. The NHTSA VIN lookup shows the unrepaired recalls of one vehicle.

Remedy of the newest campaign, 26V384000, in the NHTSA record

Altec will advise owners to inspect the IJ26 jib for missing welds. If the welds are missing, the jib should be taken out of service immediately. Altec will add the missing welds or provide a repair procedure and kit, free of charge. Owner notification letters were mailed July 23, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB-3330.
NHTSA VIN lookup

Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner's complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists.

NHTSA publishes these words. Source: NHTSA Datasets and APIs, section Complaints, read on . Complaint file through . Recall file through .

Since the last update

No tracked figure of this page changed in a data update. What the log tracks

All updates to the register

Recall campaigns

2 campaigns, newest first. 148 units in total.

  1. 26V384000Received . 14 units.

    Equipment / Mechanical / Boom/Crane/Ladder / Critical Fasteners

    Defect, in the NHTSA record
    Altec Industries (Altec) is recalling certain 2024-2026 AC Series Crane vehicles. The inside joints between the side plates and the base plates of the 26-foot insulating personnel jib (IJ26) may be missing welds.
    Consequence, in the NHTSA record
    Missing welds can lead to platform joint failure due to fatigue or overload, resulting in the platform falling from the boom tip, increasing the risk of injury.
    Remedy, in the NHTSA record
    Altec will advise owners to inspect the IJ26 jib for missing welds. If the welds are missing, the jib should be taken out of service immediately. Altec will add the missing welds or provide a repair procedure and kit, free of charge. Owner notification letters were mailed July 23, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB-3330.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number MAB-3330. Owner notification date in the NHTSA record: .

  2. 26V170000Received . 134 units.

    Exterior Lighting

    Defect, in the NHTSA record
    Altec Industries, Inc. (Altec) is recalling certain 2025 AC Series Crane and DT Series Digger Derrick vehicles. The harness intended to prevent Altec installed lighting from overloading the chassis lighting circuit was not installed, which may result in a loss of power to the body lighting or trailer lights.
    Consequence, in the NHTSA record
    Loss of body lighting or trailer lights increases the risk of a crash.
    Remedy, in the NHTSA record
    Altec will notify owners to inspect their vehicle for the harness. If the harness is missing, a repair kit will be provided, free of charge. Owner notification letters were mailed May 15, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3295.

    Report filed by Altec Industries, Inc.. Manufacturer campaign number CSN-3295. Owner notification date in the NHTSA record: .

The campaign number opens the NHTSA record. Each quotation is the text of the NHTSA recall file.

Recall campaign: One recall in the NHTSA recall file, with one campaign number. A campaign can name many makes, models and model years.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

Complaints by component

The NHTSA complaint file has no complaint for this model year.

Investigations

The NHTSA investigation file has no investigation that names this model year.

Investigation: A study of a possible safety defect by the NHTSA Office of Defects Investigation. An investigation with no closing date in the NHTSA file is open.

Other model years

The number under each year is the number of recall campaigns.

  1. 20241
  2. 20252
  3. 20261

A year without a link has fewer than 2 campaigns and fewer than 25 complaints. It has no page.

Official channels

Cite this page

Recall Register. 2025 Altec AC Series Crane: recalls and complaints. https://recallregister.com/vehicle/altec/ac-series-crane/2025/. Source: NHTSA Office of Defects Investigation, recall, complaint and investigation files. Data through .

Sources

Source
NHTSA Office of Defects Investigation
Licence
US government work, public domain
Recall file through
30 Sep 2026
Complaint file through
30 Sep 2026
First complaint in the file
1 Jan 1995
Manufacturer in the recall file
Altec Industries, Inc.

The NHTSA record is the authority. A complaint count is the number of different complaint numbers for the make, the model and the model year. How the register is made. Report an error.

Questions

How many units are in the recall campaigns for the 2025 Altec AC Series Crane?
148 units in 2 campaigns. A campaign can name other models and model years, and its units include them.
How many recall campaigns does the Altec AC Series Crane have for all model years?
NHTSA lists 2 recall campaigns for the Altec AC Series Crane, model years 2024 to 2026. 2 of them name the 2025 model year.
Is an NHTSA investigation of the 2025 Altec AC Series Crane open?
The NHTSA investigation file has no investigation that names this model year.