Recall Register

Bench Grinders Repaired by McGraw-Edison

CPSC recall 78074. Recall date: . Last publish date of the CPSC notice: .

Hazard, in the words of CPSC

Electrocution/Electric Shock

CPSC recall 78074 has the recall date 29 Aug 1978. The notice names a person as the firm, and this site does not show the name. The CPSC record gives no number of units. This register puts the recall under the hazard Electric shock.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.

CPSC publishes these words. Source: CPSC recall notices, section About the U.S. CPSC, read on . The hazard, the remedy and the incident text on this site are the words of the CPSC recall notice. Newest CPSC recall on the register: .

More of the notice

The hazard and the remedy are at the top of the page. Each quotation is the text of CPSC.

CPSC recall 78074: incidents, units, products and firms
UnitsThe CPSC record gives no number
Description
Bench Grinders Repaired by McGraw-Edison NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE August 29, 1978 Release # 78-074 Bench Grinders To Be Repaired WASHINGTON, D.C. (Aug. 29)-- The Portable Appliance and Tool Group, McGraw-Edison Co., Columbia, Mo., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary repair program for about 16,000 six-inch bench grinders, which may pose a shock hazard. A protective sleeve insulating a lead wire may wear through on some of the units, bringing the wire into direct contact with the motor shaft and possibly resulting in severe shock if the tool is not properly grounded and if the user is grounded or touching a grounded metal object such as a water pipe. Two cases have been reported where the insulation has worn through, one of which resulted in a shock. The tools were manufactured from April through July 1973, and for limited periods between February 1977 and January 1978. The repair program applies to the following models of six-inch bench grinders purchased after June 1973 and not showing any three-digit…
ProductJC Penney six-inch bench grinders
ProductKmart six-inch bench grinders
ProductToastmaster six-inch bench grinders
ProductWard's Power Kraft, Power House six-inch bench grinders
ProductWestern Auto Wizzard, Manning Bowman six-inch bench grinders, Sanders/Grinders & Accessories
FirmThe CPSC notice gives the name of a person as the firm. This site does not show the names of persons.

Recall notice: The page that CPSC publishes for one recall of a consumer product. It states the product, the hazard, the remedy and the incidents.

Hazard: The way a product can cause harm, in the words of the CPSC recall notice. This site also puts each recall under short hazard names.

Remedy: What the manufacturer or the firm does about a recalled product. The agency record states the remedy of each recall.

Units: The number of vehicles or products that a recall can include. The manufacturer or the firm reports the number to the agency.

The recall in context

Units in this recall
not givenMedian of 1978: not given
CPSC recalls of 1978
43
Recalls of 1978 with one of the same hazards
26%

Official channels

Cite this page

Recall Register. CPSC recall 78074. https://recallregister.com/product/3944-bench-grinders-repaired-by-mcgraw-edison/. Source: CPSC Recall Retrieval Web Services. Data through .

Sources

Source
US Consumer Product Safety Commission
Licence
US government work, public domain
Data retrieved
30 Sep 2026
Newest CPSC recall on the register
24 Sep 2026

The CPSC notice is the authority. The hazard names come from the hazard text of CPSC. The category is the product type that CPSC gives. How the register is made. Report an error.

Questions

Does CPSC recall 78074 report injuries?
The CPSC record of recall 78074 has no incident or injury text.